When the normal boot process completed with a list of drives / installed devices I selected my MegaRAID device and it immediately opened the MegaRAID BIOS Configuration Utility and I was on my way. I decided to be patient and let the boot process complete to see what happened.Ĥ. The MegaRAID BIOS Configuration Utility did not start. I also hit the Ctrl-H when the LSI MegaRAID startup told me to do so. The USB keyboard may be part of the problem according to LSI.ģ. As soon as the initial splash screen showed when I started the computer I pushed the F8 key on my USB keyboard. As I have an Asus Sabertooth X79 motherboard I used your suggested F8 key.Ģ.
Unfortunately I had not associated the change to the UEFI boot with my inability to access the MegaRAID BIOS Configuration Utility.ġ.
#Avago megaraid storage manager manual software#
Fit into rack-mounted servers with the low-profile form factor and side. MegaRAID Storage Manager software enables you to configure, monitor, and maintain storage configurations on LSI SAS controllers.
#Avago megaraid storage manager manual install#
install.csh - or can be done by manually going in and installing all packages with yum install command. I had to first get dnf list tcsh and then use. Connect up to 128 SATA or SAS drives with eight internal 12Gb/s SATA and SAS ports. I am happy to report that the AVAGO MegaRAID Storage manager v17.05.02.01 installed under CentOS8 and i am able to control all Physical and Logical drives. Gary this was a very helpful tip as I had not been able to get to the MegaRAID BIOS Configuration Utility since I changed my motherboard to use the UEFI boot. The MegaRAID SAS 9361-8i 12Gb/s SAS and SATA RAID controller card addresses these needs by delivering proven performance and RAID data protection for a range of server storage applications.
0 kommentar(er)
